Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Garage door installation in Burbank usually runs between $700 and $2,200 for a new single or double door, depending on size, insulation, and whether the opening needs reframing. Most Burbank homes were built between the 1920s and 1950s, which means we’re almost always retrofitting a modern door into an older, sometimes out-of-square opening rather than doing clean new-construction work. Torrance Garage Door Service has served Burbank since 2013, and we work on your brand, whether that’s a Clopay, Amarr, Wayne Dalton, or Genie system already in the garage or one you’re considering for a replacement. Call (855) 341-7719 and we’ll walk you through what your specific opening needs.
Why Burbank Homes Are Different
Burbank is a media-company town. Warner Bros., Disney, and NBCUniversal anchor the city, and a lot of our customers work odd hours on studio lots or from home edit bays. That shapes garage door work in ways you won’t see in other San Fernando Valley cities. A door that grinds at 2 a.m. when a night-shift editor gets home is not a minor annoyance here, it’s a household problem. Quiet operation is consistently one of the top requests we get for opener and door work across the Rancho, Magnolia Park, and Burbank Boulevard areas.
The housing stock compounds it. Burbank is dense with 1920s through 1950s single-story bungalows and post-war tract homes. Those garages were built for cars far narrower than today’s SUVs, so openings are often undersized, settled, and out of square. Low headroom is common, especially in Magnolia Park and the older blocks near downtown. Hillside homes above Glenoaks tend to have wider, more modern bays, but they face their own challenges with wind exposure and sun load. We also see a lot of original 1950s lift-up wood doors still in service on garages converted to offices or production storage. Homeowners usually want a quiet belt-drive opener and an insulated door without losing the vintage look of the house.
Climate matters too. Burbank sits in a hot, dry basin with intense summer sun and Santa Ana wind events. South- and west-facing doors bake, fade, and warp, and the weatherstripping cooks in a single season. The wind gusts torque lightweight doors and stress hinges and rollers. Mild winters mean no frost heave, but the annual UV and heat load drives most finish and seal replacements we handle.
Styles & brands we work with
Our Main Burbank Services
The two calls we get most from Burbank homeowners are repair and opener work, and each has its own dedicated page for this city. Here’s what each one covers.
Garage Door Repair in Burbank
Most repair calls in Burbank start with a door that won’t lift, a broken spring, or a cable that’s snapped overnight. The springs on older doors, especially on south-facing garages that absorb full afternoon heat, fail faster here than in cooler parts of L.A. County. We diagnose by brand and by symptom, then carry the common parts for Clopay, Amarr, Wayne Dalton, and Genie doors on the truck so the fix happens in one visit. Full details on what we repair, what it costs, and how long it takes are on the dedicated page.
Garage Door Opener Repair in Burbank
Opener problems are the most misdiagnosed garage issue we see. A door that reverses, a motor that hums but won’t move, or a keypad that stopped talking to the opener can be a logic board, a sensor alignment issue, or a stripped gear, and guessing wastes your time and money. Burbank has a high concentration of smart openers from LiftMaster, Chamberlain, and Genie, and connectivity problems around WiFi interference and app pairing are common. We diagnose the opener specifically, not the door as an afterthought. See the opener page for costs and same-day availability.
Garage Door Opener Repair in Burbank
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Garage door installation in Burbank is a retrofit job more often than a straightforward swap. The city’s older bungalows and post-war tracts have garages built for narrower cars, so installing a modern door frequently means adjusting the track, trimming or reframing the opening, and working around low headroom. Intense summer sun and Santa Ana wind also mean the door you pick needs to handle thermal stress and gust loads, not just look good. That’s why we recommend insulated doors for most Burbank garages, especially those facing south or west. For a full look at our installation process across door brands and opener integration, see Garage Door Installation.
Garage Door Replacement
Signs you need it
The door is sagging, panels are cracked or rotted, the frame has settled out of square, or the door is so loud and uninsulated that it disrupts the household, especially on a night-shift schedule.
What it costs in Burbank
A full garage door replacement in Burbank typically runs $700 to $2,200 depending on door size, insulation level, and whether the opening needs reframing.
How we do it
We measure the opening, check the existing track and headroom, confirm the door spec with you, order the door, then remove the old door and hardware and install the new one with balanced springs and fresh weatherstripping in one scheduled visit.
Garage Door Installation Service
Signs you need it
You’re building a new garage, converting an existing space, or the current door has failed beyond repair and you want a clean, correctly specced installation from the track up.
What it costs in Burbank
New door installation in Burbank starts at $700 and goes up to $2,200 for a larger double door with insulation and new hardware.
How we do it
We confirm the opening dimensions and headroom, install new track and hardware, hang and balance the door, and test the full cycle including the safety reversal, leaving the work area clean and the door adjusted to Burbank’s heat and wind realities.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, dust and leaves blow in during Santa Ana events, or the existing rubber seal is cracked and brittle from Burbank’s summer sun.
What it costs in Burbank
Seal installation is part of a standard door installation and is included when we install a new door, with the overall job ranging $700 to $2,200 depending on door scope.
How we do it
We replace the bottom seal or full perimeter seal as part of the door installation, choosing a material that will hold up to the UV load and heat of a Burbank summer.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| New single door installation | $700 – $1,500 |
| New double door installation | $1,200 – $2,200 |
| Panel replacement | $250 – $500 |
Do you need a permit to install a garage door in Burbank?
Most residential garage door replacements in Burbank are treated as like-for-like swaps and don’t require a separate permit, but if the opening is being widened or the garage structure modified, the city may require one. We can tell you which applies once we see the opening.
How long does a garage door installation take in Burbank?
Most single-door installations in Burbank take one scheduled visit. The door itself is usually ordered to spec, which takes a few days to a couple of weeks, and the install day typically runs three to five hours depending on the opening’s condition.
Brands We Service in Burbank
We’re certified to work on eight major garage door and opener brands, including Genie, Clopay, Amarr, and Wayne Dalton. Because our parts inventory is purpose-built for these brands, we typically arrive at Burbank homes with the right components on the truck instead of measuring, leaving, and returning days later. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
In Burbank, prices push toward the higher end of these ranges when the opening is badly out of square, headroom is tight, or a south-facing door needs extra heat-resistant weatherstripping. The price is quoted and agreed before any work starts, and it does not change once we see the door.
Neighborhoods We Serve in Burbank
We work across all of Burbank’s ZIP codes, 91505, 91506, 91507, and 91508, and we’re typically able to reach most homes same-day for repair calls. The neighborhoods below represent a cross-section of the older bungalow streets, the post-war tracts, and the hillside pockets we see regularly.
- Magnolia Park
- Rancho Adjacent
- Burbank Boulevard corridor
- Hillside above Glenoaks
- Downtown Burbank blocks
Service Area – Cities Near Burbank
Our Burbank crews also route into the surrounding cities when schedules allow. We serve Universal City, CA for studio-adjacent homes, North Hollywood, CA across the 134, Glendale, CA for post-war tracts and hillside garages, and Studio City, CA for the canyon and flatland mix. If you’re on the edge of Burbank and unsure which service area you fall into, call us.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
Most Burbank repair calls are handled the same day. The city is geographically compact and we keep trucks stocked for common Clopay, Amarr, Wayne Dalton, and Genie failures, so we don’t need to make two trips. Call (855) 341-7719 to confirm current availability for your neighborhood.
Some Burbank neighborhoods, especially newer hillside developments, have HOA design rules around door color and style, and structural changes to the opening may require city approval. A like-for-like door swap usually doesn’t. We’ll flag anything that applies once we see the property.
Yes. We work with door manufacturers that make carriage-style and wood-look doors, so a 1940s Magnolia Park bungalow can get a modern insulated door and a quiet belt-drive opener without losing its street presence. We’ll match the style to the home’s era and the neighborhood’s character.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Roger Hoffman"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— Steven Wong"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Yolanda Vargas