Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Burbank
Garage door repair in Burbank runs $150 – $600 for most jobs, with spring repair typically landing between $180 – $340. We’re Torrance Garage Door Service, and we work on your brand – Genie, Clopay, Amarr, Wayne Dalton, and the other major manufacturers – so we arrive with the right parts and a plan. When a door won’t open on a Burbank morning, you don’t need a generalist with a long list of services. You need someone who works on garage doors every single day.
Call (855) 341-7719 for a free estimate. We know Burbank’s older garages, its narrow single-bay openings, and the way a stuck door turns a normal workday upside down. We’ll get to you fast.
Why Torrance Garage Door Service Is Burbank’s Preferred Garage Door Repair Company
Burbank is not a new-construction market. Most of the garages we work in date to the 1920s through the 1950s – original lift-up wood doors, early sectional tracks, spring systems that predate modern safety standards. That’s not a problem for us. It’s the bulk of what we see. Our technicians look at a door and know whether the issue is the springs, the cables, the tracks, or the opener, because garage doors are all we do.
Phil Damico leads our team, and he’s built the company around one principle: diagnose the brand in front of you, fix it right, and don’t make customers wait through a second visit for a part we should have had on the truck. That’s why Burbank homeowners call us back when an opener fails next year or when it’s finally time to replace the original door. The right part, the right fix, one visit.
We also understand Burbank’s schedule. A lot of our customers near the studios and in the hills keep odd hours. We quote the price before any work begins – you’ll never get a surprise invoice after the door is back on its tracks.
Styles & brands we work with
Emergency Garage Door Repair in Burbank
Emergency Garage Door Repair in Burbank is for the moments when the door won’t close at all, or worse, it’s half-open with your car inside and a production call in forty minutes. A snapped spring, a cable that’s jumped the drum, or a door that’s come off its tracks – these are safety issues as much as convenience issues. The high-tension springs and cables on a garage door can cause serious injury if handled improperly. We recommend a trained professional for any spring or cable work, and that’s exactly who we send.
Most emergency repairs in Burbank run between $150 and $600, depending on what failed. A snapped spring is $180 – $340. A broken cable is $130 – $250. We carry springs, cables, rollers, and opener parts for the brands Burbank homeowners actually have, so we’re usually able to fix the failure on the first visit.
When a Spring Let Go Overnight
You’ll know it before you see it – the loud bang from the garage. One spring snaps and the door becomes dead weight. The opener can’t lift it. Don’t keep pressing the button; you’ll burn out the motor. Call us. We’ll identify whether you have a standard torsion spring or the older extension-spring setup common on Burbank’s 1950s doors, and we’ll quote the replacement before we start.
Door Off the Track on Glenoaks
Hillside homes above Glenoaks Boulevard often have wider, modern bays, but when a roller breaks or a cable frays, the door can twist and jump the track. We realign the track, replace the bad rollers, and get the door seated again. Track realignment runs $120 – $240 in Burbank, and roller replacement is $110 – $220.
Garage Door Panel Replacement in Burbank
Garage Door Panel Replacement in Burbank is a common fix for homes with south- and west-facing doors. Burbank sits in the San Fernando Valley basin, and the summer sun does real damage to wood and metal panels. A faded surface can be refinished, but a warped or cracked panel compromises the door’s structure and seal. Replacing a single panel typically runs $250 – $500, and it restores the door’s integrity without the cost of a full replacement.
When a car, a delivery truck, or a Santa Ana wind-blown trash bin dents a lower panel, replacing that panel is usually the smart move. It’s faster than a full door replacement and keeps the rest of your hardware in service. We match the panel to the existing door where possible, including older Clopay and Amarr models that are still common in Burbank’s post-war tracts.
Warped Wood Panels in Magnolia Park
Magnolia Park and the older blocks near downtown Burbank have many original wood doors that have been repainted but rarely resealed. Years of UV exposure warps the wood and cooks the weather seal. We replace the panel and reseat the seal so the door closes flush against the jamb again.
Impact Damage on a Single-Bay Door
Burbank’s older single-bay garages are tight. A bumper tap that wouldn’t matter on a wide modern door can buckle a section panel. We’ll assess the track alignment too – if the impact shifted the door, one panel won’t be the whole story.
Trusted Brands We Service in Burbank
We work on your brand. That’s not a slogan – it’s the reason Burbank homeowners call us instead of someone who shows up and says the system is out of scope. Our technicians are certified to service eight major manufacturers: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. In Burbank, we regularly work on Clopay and Wayne Dalton doors on the mechanical side, and Genie openers on the motor side. We stock the hardware those systems need, so we’re not ordering your spring and coming back in a week. We fix it that day.
Common Garage Door Repair Problems We See in Burbank Homes
- Original extension springs failing unevenly on 1920s – 1950s lift-up doors. The door slams the last two feet or hangs crooked. That’s a door-balance problem, not an opener problem, and we fix the springs and cables, then rebalance the door.
- Out-of-square, undersized single-bay openings in older bungalows. Before any modern sectional door or opener rail will fit, the track alignment and headroom often need reworking. We handle that on the spot.
- South- and west-facing doors with cooked weather seals and faded finishes. The San Fernando Valley UV load dries out wood and degrades rubber seals. Santa Ana wind gusts then rattle lightweight doors and stress hinges and rollers. We replace seals and tighten hardware.
- Opener motors straining against doors that have never been rebalanced. The opener isn’t weak – the door is heavy. We diagnose the real problem before touching the motor, so you don’t pay for an opener replacement when all you need is spring work.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Repair in Burbank, CA
Here’s what Burbank homeowners actually pay, based on the jobs we do in the 91505, 91506, 91507, and 91508 ZIP codes. The numbers below are the ranges you can expect:
| Service | Typical Burbank Range |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
Every quote is given and agreed before we start work. No surprise line items when the door is back on its tracks. Call (855) 341-7719 for a free estimate on any of these repairs.
We Also Serve Cities Near Burbank
Our Garage Door Repair team covers Burbank and the surrounding area, including Universal City, North Hollywood, Glendale, and Studio City. If you’re in one of those cities, we’ll bring the same brand-specific service to your door. Check our Garage Door Repair in Burbank page for local service details.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Burbank
If the wood is structurally sound, repair it. A new spring set, cables, and a rebalance usually cost $180 – $340 and can keep a vintage door running for years. If panels are warped, the track is out of square, or you want insulation and quiet operation, a retrofit to a modern sectional door runs $700 – $2200 installed. In Burbank’s older bungalows, the retrofit often includes headroom and track-alignment work. We’ll give you both options with exact numbers before you choose. Call (855) 341-7719 for an on-site assessment.
Switch to a belt-drive opener, replace metal rollers with nylon, and seat the weather seal properly against the jamb. That combination removes most of the mechanical noise that travels through a shared wall. In Burbank, where garages double as offices and edit bays, we tune the whole assembly – rollers, hinges, seal, and opener – not just one part. Expect to spend $110 – $220 for roller replacement and $250 – $550 for a belt-drive opener installation. Call (855) 341-7719 and we’ll listen to what you’re actually hearing.
For most Burbank homes, a high-cycle spring is the better value. Standard springs are rated for about 10,000 cycles, which is three to five years of normal daily use. High-cycle springs last two to three times longer and cost only slightly more. Spring repair in Burbank runs $180 – $340, so the marginal cost of a high-cycle spring is small compared to paying for another replacement in a few years. We’ll quote both and let you decide before we start work. Call (855) 341-7719 for the exact numbers on your door.
It’s almost always the springs. When a spring loses tension, the opener is lifting the full weight of the door, which it was never designed to do. That strain shortens the motor’s life and makes the door dangerous to operate. In Burbank, where many doors still have original extension springs, we check the door balance before we touch the opener. If the springs are the problem, repair is $180 – $340. If the opener has been damaged by years of lifting a heavy door, opener repair runs $120 – $320. Call (855) 341-7719 and we’ll diagnose it properly.
Usually yes, but the opening may need track alignment or headroom work first. Burbank’s 1920s – 1950s single-bay garages were built for cars far narrower than today’s SUVs, and the openings are often out of square. A new sectional door can typically be installed after we rework the tracks and confirm the headroom for the opener rail. New door installation runs $700 – $2200, and track realignment is $120 – $240 if needed. Call (855) 341-7719 and we’ll measure your opening and give you a written price.
Contact Torrance Garage Door Service in Burbank
Burbank’s studio-town garages are full of old doors, tight openings, and hardware that’s been working since before most of us were born. When one of them fails, you want someone who already knows what’s behind the panel. Phil Damico and our team work on garage doors exclusively – not plumbing, not HVAC, not handyman jobs. From first repair to full replacement, we’ll give you a straight answer and a fixed price before any work starts.
Call (855) 341-7719 for a free estimate on any garage door repair in Burbank. We’ll come out, diagnose the brand you have, quote the fix, and get your door moving again.
Written by Phil Damico, Owner at Torrance Garage Door Service, serving Burbank and the San Fernando Valley.